ORFS Female 45 Degree Elbow Crimp Fitting for 1/2 Inch Hydraulic Hose

Description

When you’re routing hydraulic lines around tight spots under the hood or need to change direction without kinking your hose, this 45-degree elbow fitting is exactly what you need. The ORFS threads create a leak-proof seal that’ll hold up to whatever pressure your hydraulics can throw at it, while the moderate 45-degree angle gives you just enough bend to clear obstacles without the sharp turn of a 90-degree fitting.

What You’re Getting

• ORFS design is becoming the standard on newer equipment because it seals better and lasts longer than older thread styles
• 45-degree angle provides smooth flow and reduces pressure drop compared to sharper bends
• Crimp-on design creates a permanent, reliable connection to 1/2 inch hydraulic hose
• 13/16 inch thread size fits common hydraulic ports on tractors and implements

Built for Real Farm Work

This fitting is designed for the demanding hydraulic systems found on today’s tractors and farm equipment. Whether you’re working on a loader, three-point hitch system, or auxiliary hydraulics, this elbow handles the high pressures and constant flexing that comes with real farm work. The moderate angle works great for connecting remote hydraulic outlets, steering cylinders, or implement connections where you need to navigate around frame rails or other equipment.

Made to Last

Parker’s been making hydraulic fittings for decades, and this one’s built to their same high standards. The precision-machined threads and quality materials handle temperature swings, vibration, and the corrosive environment around farm equipment. The ORFS threads are straight threads with an O-ring seal, which means they seal better and resist loosening from vibration.

Installation Notes

This is a crimp-on fitting that requires the proper dies and crimping equipment for installation. The ORFS threads are straight threads with an O-ring seal, so don’t over-tighten them like you would pipe threads. Make sure your hose is cut square and clean before crimping for the best seal and connection.