Metric Cross and Bearing Kit for Walterscheid Series II PTO Driveline

Description

When your PTO shaft starts making that telltale clicking noise or you feel vibration under load, it’s time to rebuild those U-joints before they fail completely. This metric cross and bearing kit gives you everything you need to restore smooth power transfer in your Walterscheid Series II driveline, getting you back to work without the worry of catastrophic failure that can damage expensive implements.

What You’re Getting

• Complete cross and bearing assembly with snap rings for Type 2 yokes (grooves in the yokes)
• Precision-machined 34mm bearing caps that fit tight and stay put
• 89.9mm overall length matches original Walterscheid Series II specifications exactly
• Quality Weasler construction that handles the constant flexing of PTO operation

Built for Real Farm Work

This kit is designed specifically for Walterscheid Series II metric PTO drivelines found on mid to large tractors and heavy-duty implements. Whether you’re running a rotary cutter, hay equipment, or tillage tools, these joints transfer power through constantly changing angles while absorbing the shock loads that come with field work.

Made to Last

Weasler doesn’t cut corners on PTO components because they know what’s at stake when driveline parts fail. The cross is precisely machined to maintain exact 90-degree angles between bearing journals, while the needle bearings are manufactured to tight tolerances for smooth rotation without the play that causes premature wear.

Installation Notes

This is a direct replacement for Type 2 yokes where the snap ring grooves are machined into the yoke rather than the bearing caps. Mark your yoke positions before disassembly to maintain proper phasing and prevent vibration. Always replace snap rings – they lose tension over time and will pop out when you least expect it.