Description
When you’re out in the field and something breaks loose on your implement, it’s usually a roll pin that’s sheared or fallen out. This 5/16 inch by 1 inch roll pin is the kind of simple but critical part that keeps shafts, levers, and connections locked in place where they belong. Whether it’s holding a PTO shaft coupling together or keeping a pivot pin from sliding out of a bush hog deck, this little workhorse does a big job.
What You’re Getting
- Spring steel construction that flexes to fit tight in the hole and stays put
- 5/16 inch diameter and 1 inch length fits common tractor and implement applications
- Split design compresses during installation then springs back to lock securely
- Heat-treated steel resists shearing under load and won’t bend like cheap pins
Built for Real Farm Work
This roll pin works in tractors, implements, and equipment where you need to secure shafts, hold assemblies together, or keep pivot points from walking out. You’ll find them in PTO connections, loader arms, disc harrow gangs, cultivator shanks, and dozens of other places where parts need to stay put despite vibration and heavy loads.
Made to Last
Farm equipment puts roll pins through constant stress from vibration, side loads, and temperature changes. This spring steel pin is built to handle it all. The split design lets it compress when you drive it in, then spring back to create a tight, secure fit that won’t work loose over time.
Installation Notes
Drive the pin in with a punch or pin driver until it’s flush or slightly below the surface. The split will compress as it goes in, then expand to grip the hole walls. If you’re replacing a sheared pin, make sure to clean out any metal fragments from the hole first. Keep a few spares in your toolbox—when one fails, you’ll want to get back to work fast.
Reviews
There are no reviews yet.