Description
When your old Ford tractor starts burning oil or knocking like a woodpecker, it’s time for a rebuild. This basic engine kit gives you everything you need to bring that 134 cubic inch gas engine back to life. Whether it’s your trusty NAA that’s been plowing fields since the ’50s or a 2000 series that’s seen better days, this kit gets you back to work without breaking the bank.
What You’re Getting
- Complete cylinder sleeves, pistons, and rings for all four cylinders
- Wrist pins, retainers, and pin bushings for smooth piston operation
- Complete gasket set that seals everything up tight from top to bottom
- Quality Tru-Power components that meet original specifications
- Everything sized for the 3-7/16 inch standard bore on these engines
Built for Real Farm Work
This kit is designed for the workhorse Ford tractors that helped build American agriculture—the NAA Golden Jubilee, the reliable 600 and 700 series, and the early 2000 tractors from ’63-’64. These were the tractors doing everything from mowing hay to pulling manure spreaders, and they need parts that can handle that kind of daily grind.
Made to Last
Tru-Power has been making engine rebuild components for decades, and they know what it takes to survive in a farm environment. The sleeves are cast to handle the heat cycles, the pistons are designed for long life, and the gasket set includes all the seals you need to keep oil where it belongs.
Good to Know
This is a basic kit, so you’ll need to source your main and rod bearings separately if they need replacement. Before you start, check your bore measurements—this kit is for standard bore engines with the slotted drive oil pump. If you’re not sure about the rebuild process, having a machine shop check your block and crankshaft can save you headaches down the road.
Reviews
There are no reviews yet.