Description
If your old Ford tractor is running rough, hesitating on acceleration, or just not quite hitting on all cylinders like it used to, chances are the carburetor needs some attention. These vintage 600 and 700 series tractors were workhorses in their day, and with the right parts, they’ll keep pulling their weight for years to come. This repair kit gives you everything you need to get that 134 cubic inch gas engine running smooth again.
What You’re Getting
- Complete throttle shaft that eliminates the play and air leaks that cause erratic idle
- Viton float valve that seals tight and resists modern ethanol fuel
- Float lever pin for smooth operation and proper fuel level control
- Full gasket set to seal up the carburetor and prevent vacuum leaks
Built for Real Farm Work
This kit works with the Marvel-Schebler TSX428 carburetors found on Ford 600 and 700 series tractors from the era when these machines were the backbone of smaller farming operations. Whether you’re using yours for hay work, cultivating, or just keeping the home place tidy, this is the same quality you’d expect from the original factory setup.
Made to Last
The Viton float valve is a real upgrade over the old-style rubber components—it handles today’s ethanol-blended fuels without swelling or deteriorating. The gaskets are made from materials that seal properly and hold up to the temperature cycling and vibration these old tractors dish out.
Good to Know
This is everything you need for a minor carburetor overhaul, but you’ll want to have the carburetor off the tractor to do the work properly. Clean everything thoroughly before assembly—old varnish and dirt are the enemy of smooth carburetor operation. A good carburetor cleaner and some patience will make the job go much easier.
Reviews
There are no reviews yet.