Description
When you’re putting together hydraulic lines on your tractor or building custom plumbing for the shop, this black iron close nipple is the straightforward, reliable fitting that gets the job done. It’s the simple connector that joins two female threaded fittings without adding much length to the connection—perfect for tight spots where every inch matters.
What You’re Getting
- Male NPT threads on both ends that screw in tight and seal properly
- 3/4 inch diameter handles moderate hydraulic pressures and flow rates
- 2-inch length gives you enough room to work with while keeping connections compact
- Black iron construction resists corrosion better than plain steel
- Standard threading that works with all your existing NPT fittings
Built for Real Farm Work
This fitting works great in hydraulic systems on tractors, loaders, and implements where you need to connect valves, cylinders, or other components. It’s also handy for custom plumbing jobs around the farm—from building wash stations to setting up hydraulic-driven equipment. The 3/4 inch size is common on mid-size hydraulic systems and shop air lines.
Made to Last
Black iron pipe fittings have been the standard for decades because they hold up to pressure and weather. The coating helps prevent rust, and the malleable iron construction can handle the vibration and pressure cycles that come with hydraulic work. These fittings seal tight when properly threaded and don’t work loose over time.
Good to Know
Use pipe thread compound or Teflon tape on the threads for the best seal—hydraulic fluid finds every little gap. Thread it in hand-tight first, then use a wrench to snug it down. Don’t overtighten black iron fittings since they can crack if you’re too aggressive with the wrench.
Reviews
There are no reviews yet.