Description
That dreaded clicking sound when you turn the key but your tractor won’t crank over? Nine times out of ten, it’s this little relay calling it quits. This 70-amp starter relay is the bridge between your ignition switch and starter motor – when it works, you turn the key and away you go. When it fails, you get that frustrating click-click-click while your expensive machine sits dead. The good news is it’s about the cheapest fix you’ll ever make on a tractor, and you can swap it out in about ten minutes.
What You’re Getting
- Heavy-duty 70-amp rating handles the massive current draw when your starter first engages
- Four-pin design with proper connections for power in, power out, ground, and key switch signal
- Direct replacement that plugs right in – no wire splicing or modifications needed
- Quality contacts that resist burning and pitting from thousands of start cycles
- Sealed housing keeps moisture and dirt out – the two biggest relay killers on farm equipment
Built for Real Farm Work
This relay fits a huge range of modern tractors, from Massey Ferguson 5400 series utility tractors all the way up through the big 7700 DYNA models, plus Valtra N and T series machines. These are the tractors doing the heavy lifting on farms everywhere – whether you’re running a 5455 on hay equipment, pulling tillage with a 7720 DYNA, or handling heavy draft loads with a Valtra T series. When this little relay fails, your expensive starter motor can’t get power, leaving you dead in the water at the worst possible time.
Made to Last
That 70-amp rating means this relay can handle the massive current surge when your starter first kicks in – we’re talking hundreds of amps for a split second. The heavy-duty contacts inside are designed to handle this punishment thousands of times without burning up. The sealed case keeps farm dirt and moisture out, which are what kill most relays on agricultural equipment.
Good to Know
Swapping a starter relay is about as easy as tractor repairs get. It’s usually mounted near the starter or on the firewall – just unplug the old one and plug in the new one. The four pins only go one way, so you can’t mess it up. If you’re troubleshooting, you can often hear the relay click when someone turns the key. No click usually means bad relay or no power to it. Click but no start means the relay’s working but something else is wrong. Keep a spare in your toolbox – when you need one, you REALLY need one.
Reviews
There are no reviews yet.