Description

You’re hauling that planter between fields at dawn and traffic is backing up behind you. Or maybe you’re broken down on the shoulder with a flat implement tire. Either way, working hazard lights aren’t just about staying legal—they’re about staying alive when sharing roads with distracted drivers. This toggle rocker switch gets your emergency flashers working again so you can signal danger and protect yourself when visibility is poor.

What You’re Getting

Toggle-rocker design that won’t stick or fail when you need it most
Heavy-duty contacts that handle multiple warning lights without burning out
Weather-resistant construction keeps out moisture and road dirt
Direct replacement fits existing dash opening without modifications

Built for Real Farm Work

This switch controls the hazard warning system across a wide range of John Deere’s workhorse tractors. Whether you’re running utility work with a 5E series, operating a 6M through harvest season, or moving equipment with one of the bigger 7030 models, your hazard lights are critical for road travel and marking equipment in dangerous situations.

Made to Last

Hazard switches get constant use during farming seasons when equipment moves frequently between fields. This switch uses sealed contacts that resist the arcing and corrosion that kill cheaper units. The rocker mechanism handles thousands of on-off cycles while dealing with the dust, vibration, and temperature swings that come with agricultural equipment.

Installation Notes

Disconnect your battery before starting to avoid any electrical shorts. This switch typically connects to power in, power out to the flasher unit, and ground. Test all four corners after installation to make sure your warning lights flash in proper sequence. If one corner isn’t working, check for burned bulbs or loose connections before assuming the switch is bad.