Description

When you’re assembling disc gangs or replacing worn hardware on your tillage equipment, having the right nut for the job makes all the difference. This 1-inch zinc hex nut gives you a secure, weather-resistant connection that handles the constant vibration and stress that comes with working tough ground. Whether you’re putting together a disc harrow or fixing other agricultural equipment, this nut threads on smoothly and holds tight.

What You’re Getting

Zinc plating protects against rust and corrosion so it won’t seize up on the threads
Grade 2 steel construction provides the right balance of strength and workability for farm use
1-inch thread size fits common disc axle hardware and heavy-duty agricultural applications
Standard hex design works with your regular wrenches and sockets

Built for Real Farm Work

This nut is designed for disc harrows, field cultivators, and other tillage implements where the square axle setup is standard. Whether you’re working behind a utility tractor breaking up compacted soil or pulling a heavy disc across uneven ground, this hardware handles the punishment that comes with field conditions. It’s the kind of reliable fastener you need when putting together disc gangs or making repairs that have to last.

Made to Last

The zinc plating extends service life by protecting against rust and corrosion, so you can count on it season after season. This Grade 2 steel gives you solid holding power without being so hard it becomes brittle. The zinc coating means you won’t be fighting rusted hardware when it’s time for maintenance or adjustments.

Good to Know

Always use a flat washer when possible to distribute the load and prevent the nut from pulling into softer materials. A little anti-seize compound on the threads makes future removal much easier, especially if the connection might see heat or road salt. Keep some extras on hand – these nuts tend to disappear right when you need them most during busy seasons.