Description

When your conveyor belt tears during harvest or feed handling, you can’t afford to wait for a service truck. Every minute of downtime costs you money and stress. These heavy-duty belt lacing hooks get your grain elevator, feed mixer, or hay conveyor running again in minutes, not hours. They’re the quick fix that holds up under the toughest conditions.

What You’re Getting

Perfect size for belts 1/4″ to 9/32″ thick – covers most agricultural conveyors
45 hooks per 7-inch strip provide multiple connection points for extra strength
Galvanized coating fights off rust from grain dust, humidity, and fertilizer chemicals
Carded hooks stay properly spaced during installation for a professional repair
Box of 10 strips handles several repairs or one long splice

Built for Real Farm Work

This is the repair solution that keeps grain elevators moving, feed mixers churning, and hay conveyors flowing. Whether you’re dealing with a torn belt on your elevator leg, a damaged section on your TMR mixer, or a worn spot on your bale conveyor, these clips create a mechanical joint that’s often stronger than the original belt. They work on everything from narrow 4-inch belts to wider conveyor applications.

Made to Last

Farm environments are tough on belt repairs. Between the moisture in grain bins, corrosive fertilizer dust, and the constant flexing of conveyor systems, cheap fixes don’t last. The galvanized construction on these hooks resists the kind of corrosion that weakens repairs and leaves you with another breakdown just when you can’t afford it.

Good to Know

You’ll need a .125″ diameter pin to complete the installation – pick one up if you don’t have spare pins on hand. Square-cut your belt ends for the strongest joint, and make sure you drive those hooks completely through the belt. Keep a box of these in your shop because belt failures never happen at convenient times, and having the repair materials ready can save you hours of downtime.