Description
When your three-point hitch starts feeling loose or making grinding noises during implement operation, worn lift arm bushings are often the culprit. These bushings take the brunt of the stress from heavy implements and constant movement in the field, and when they wear out, you’ll notice sloppy operation and poor implement control. This pair of zinc-plated sleeve bushings restores that tight, smooth feel you’re used to.
What You’re Getting
- Precision-sized to restore proper clearances and eliminate play in your lift arms
- Zinc-plated finish resists corrosion from moisture, fertilizer, and field chemicals
- Standard 7/8-inch inside diameter fits all Category 1 and 2 draw pins perfectly
- Set of two bushings so you can replace both sides at once for even wear
Built for Real Farm Work
This bushing set is designed for Category 1 and Category 2 three-point hitch systems, covering a huge range of utility and mid-size tractors from compact operators to bigger row-crop machines. Whether you’re running a brush hog, box blade, finish mower, or cultivator, these bushings handle the constant stress and movement that comes with serious implement work.
Made to Last
Farm work is hard on bushings—they’re constantly loaded, twisted, and exposed to dust, moisture, and chemicals. These zinc-plated bushings are built to handle that punishment, with corrosion protection that keeps them working season after season. The precise tolerances ensure smooth operation without the binding that cheap bushings sometimes cause.
Good to Know
Installation is straightforward—just remove the old bushings and press in the new ones. A little grease on the pins during assembly helps everything work smoothly. Since bushings usually wear at the same rate, it’s smart to replace both sides together. Check your lift arm pins while you’re at it—worn pins will chew up new bushings in a hurry.
Reviews
There are no reviews yet.