Description

When your PTO driveline starts making noise or vibrating, it’s often the yoke that’s worn out and needs replacing. This Weasler 14 series implement yoke connects your tractor’s power to implements like brush hogs, tillers, and other medium-duty equipment. The 1-1/8 inch square bore is designed for implements that use square shafts instead of round ones—common on many older and specialized machines.

What You’re Getting

1-1/8 inch bearing caps handle the power from 40-80 HP tractors without breaking a sweat
Square bore design grips tight without the slippage you get from worn splines
3-7/8 inch center-to-end length provides proper driveline geometry for smooth operation
External snap ring design means you can service U-joints with basic tools
Direct replacement that bolts right up without modifications

Built for Real Farm Work

This 14 series yoke works great on implements like smaller rotary cutters, tedders, rakes, and other PTO equipment that doesn’t need the beef of a larger series. It’s perfect for those 40-80 horsepower tractors running lighter implements where you need reliable power transfer. The square bore design is common on older implements and some specialized equipment where round splines aren’t used.

Made to Last

Weasler doesn’t mess around—their yokes are forged tough and machined to tight tolerances. The square bore is cut precisely so it slides on smooth but doesn’t slop around after a season of use. The bearing surfaces are ground smooth and built to handle the constant speed changes and angles that come with real field work.

Good to Know

Installation is straightforward—slide the yoke onto your implement’s square shaft and secure it with the appropriate hardware (usually a bolt through the shaft). Make sure you’ve got the right series match—this 14 series needs to mate with other 14 series components for proper fit. Check your old yoke for wear in the square bore before installing the new one.