Description
When you’re hitching up that hay wagon or equipment trailer, the last thing you want is to wonder if your coupler’s going to hold up. This Bulldog A-frame coupler is built for serious work, with a 5,000-pound capacity that handles everything from grain trailers to implement carriers. The low-profile design keeps your trailer sitting level, and the 50-degree angle makes backing up and connecting a whole lot easier.
What You’re Getting
- Heavy-duty construction that’s rated for 5,000 pounds with safety margin up to 7,000 pounds
- Low-profile latch design that won’t snag or get in your way when loading equipment
- 50-degree coupler angle that makes hooking up smoother, especially in tight spaces
- Direct bolt-on A-frame mount fits standard trailer tongues without modifications
- Works with standard 2-inch trailer balls that most farm trucks already have
Built for Real Farm Work
This Class 3 coupler handles the kind of loads you see around the farm – from pulling loaded grain carts and hay wagons to moving implements between fields. Whether you’re hauling a disc harrow to the back forty or bringing a manure spreader up from the barn, this coupler gives you the strength and reliability you need for day-to-day farm operations.
Made to Last
Farm trailers take a beating bouncing through fields and down gravel roads. This coupler’s built with heavy steel construction that stands up to the constant jarring, mud, and weather that comes with agricultural work. The latch mechanism stays smooth even after seasons of use, and the whole assembly is designed to handle the side loads you get when turning corners with implements.
Installation Notes
The mounting holes are 2.312 inches in diameter and spaced for standard A-frame trailer tongues. Installation is straightforward with basic hand tools – just make sure your trailer tongue is clean and the bolts are properly torqued. A quick tip: put a little anti-seize on the bolt threads so you can get them out later if you need to.
Reviews
There are no reviews yet.