Description

When you’re connecting different sized lines in your hydraulic system or fuel setup, you need a fitting that’ll hold up under pressure and won’t let you down in the middle of harvest. This black iron reducer bushing steps down from 1-1/4 inch to 1 inch connections, making it easy to adapt your plumbing when you’re upgrading equipment or making repairs.

What You’re Getting

Male pipe thread on the outside (1-1/4 inch) that screws into larger fittings
Female pipe thread on the inside (1 inch) for connecting smaller components
Heavy-duty black iron construction that handles high pressure and temperature swings
Standard NPT threads that work with most hydraulic and plumbing components
Compact design that fits in tight spaces where every inch counts

Built for Real Farm Work

This reducer bushing is perfect for hydraulic systems on tractors, loaders, and implements where you need to connect different sized lines or components. You’ll also find it handy for fuel system modifications, shop air lines, and any plumbing job where you’re stepping down pipe sizes. It’s the kind of adapter that comes in handy when you’re upgrading older equipment or making custom connections.

Made to Last

Black iron fittings are the workhorse of hydraulic systems because they can handle the pressure and punishment that comes with farm work. The material resists corrosion better than regular steel and won’t crack under pressure like cheaper alternatives might. These threads are cut clean and true, so they seal tight without cross-threading.

Installation Notes

Thread the male end into your larger fitting first, then connect your smaller component to the female end. A little pipe dope or thread sealant helps ensure a leak-free connection. Don’t over-tighten—snug plus a quarter turn is usually enough to get a good seal without stripping threads.