Description

When you’re trying to break loose a rusted bolt, chisel off old welds, or clean up metal surfaces on your equipment, a good cold chisel is as essential as a good hammer. Farm work is tough on tools, and this Mayhew chisel is built to take it. The black oxide finish not only looks professional but provides corrosion resistance for tools that might sit in a damp shop for months between uses. The steel construction can handle the shock of hammer blows and the pressure needed to move stubborn components without bending or breaking. This 3/4″ x 7″ cold chisel gives you the right balance of size and reach for most farm maintenance jobs.

What You’re Getting

Professional-grade steel construction that won’t bend or chip under heavy hammer blows
Black oxide finish resists rust and corrosion in damp shop conditions
3/4″ cutting edge provides enough width for efficient material removal without being unwieldy
7″ length gives you good reach while maintaining control and accuracy
Properly hardened and tempered for long-lasting performance on farm equipment

Built for Real Farm Work

This chisel is sized perfectly for the kind of metalwork you’ll encounter on tractors, implements, and shop fabrication. Whether you’re removing old welds on a cultivator shank, cleaning up cut edges on steel plate, or breaking loose seized bolts on hydraulic fittings, the 3/4″ cutting edge handles the job without being too big or too small. It’s also handy for cutting chain, trimming metal strapping, or any time you need to remove material with precision.

Made to Last

This tool is built to handle the shock of hammer blows and the pressure needed to move stubborn components. The black oxide finish provides corrosion resistance for tools that might sit in a damp shop for months between uses, and the steel construction won’t let you down when you need it most. It’s the kind of chisel that’ll still be sharp and straight after years of farm shop use.

Good to Know

Like any chisel, keep the cutting edge sharp with an occasional touch-up on the grinder for best results. Always wear safety glasses when chiseling, especially around old paint or galvanized surfaces. If you’re working on hardened steel, take lighter cuts to avoid damaging the chisel edge, and remember that patience usually works better than brute force when precision matters.