Inner Tie Rod End for International Harvester 300, 400, 500, and 2400 Series Tractors

Description

If your steering feels loose or your tractor’s pulling to one side during fieldwork, that worn inner tie rod end might be the culprit. This small but critical part connects your steering linkage to keep your front wheels tracking straight and true. When it’s working right, you’ll barely notice it—but when it starts wearing out, you’ll feel every bump and rut in the field.

What You’re Getting

• Precision .687-inch diameter with 18 right-hand threads for a secure fit on your steering assembly
• Proper 3-1/8 inch length to center of post matches factory specifications exactly
• Heavy-duty construction designed to handle the constant movement and stress of steering
• Direct replacement that works with both swept back and straight adjustable axles

Built for Real Farm Work

This inner tie rod end fits a wide range of International Harvester tractors including the popular 385, 484, 485, 574, 584, and 594 models, plus the Hydro 84 and other models in the 300-500 series lineup. These are the workhorses you see pulling cultivators, running hay equipment, and handling daily chores around the farm where precise steering control matters.

Made to Last

Farm steering components take a beating from rough ground, heavy implements, and constant use. This tie rod end is built with quality materials that can handle the vibration and stress of real farm work, keeping your steering tight and responsive season after season.

Installation Notes

This is the inner end with the threaded post that connects to your tie rod assembly. Make sure to check your thread pitch—this one’s got 18 threads per inch with right-hand threads. A little anti-seize compound on the threads makes future service easier if you ever need to adjust or replace it down the road.