Offset Half Links for 50 Double Strand Roller Chain

Description

When you’re running chain drives on your equipment and need to get the length just right, these offset half links are what you need. Sometimes your chain measurement falls between full links, or you need to make a small adjustment without replacing the whole chain. These handy half links let you fine-tune your chain length by adding exactly one-half pitch to your existing setup.

What You’re Getting

• Two offset half links per package—enough for most single adjustments
• Standard carbon steel construction that matches your #50 double strand chain
• Precise 5/8 inch pitch spacing that maintains proper chain timing
• Double strand design with 1.53 inch overall width fits your existing sprockets
• Quality manufacturing that handles the same loads as your regular chain links

Built for Real Farm Work

These offset links work with standard #50 double strand roller chain, the workhorse size you’ll find on conveyors, elevators, and drive systems throughout agricultural equipment. Whether you’re working on grain handling equipment, feed mixers, or other machinery that uses this common chain size, these links help you get the perfect fit without guesswork.

Made to Last

Each link is made from carbon steel with the same specifications as quality roller chain—0.200 inch pins, 0.400 inch rollers, and proper heat treatment. They’re built to handle the loads and conditions your equipment dishes out, so you don’t have to worry about weak spots in your chain run.

Good to Know

Installation requires a chain breaker tool to remove pins and reassemble the chain with the new links. Always check that your chain tension is correct after adding offset links, and make sure the chain runs smooth on your sprockets before putting the equipment back to work.