Single Spool Hydraulic Motor Control Valve with Detent – Open Center Design

Description

If you’re running hydraulic motors on your equipment—like augers, conveyors, or rotary cutters—you know how frustrating it is when they won’t hold their position or when you can’t get smooth reversible operation. This single spool hydraulic valve is specifically designed for motor control, with detent positions that let you set the motor direction and walk away while it keeps running exactly where you left it.

What You’re Getting

• Motor-specific spool design that handles the unique flow requirements of hydraulic motors
• Detent feature in all three positions—forward, reverse, and neutral—so the motor stays put without constant hand pressure
• Freewheel capability in neutral position lets the motor coast to a stop naturally instead of sudden jerky stops
• 30 GPM flow capacity handles most farm hydraulic motors without choking them down
• Built-in adjustable relief valve set at 2000 PSI protects your motor from pressure spikes

Built for Real Farm Work

This valve shines when you’re operating equipment that needs to run continuously in one direction—think grain cart unloading augers, manure spreader beaters, or feed mixer motors. The detent feature means you can engage the motor, let go of the handle, and focus on other tasks while it keeps running. When you need reverse operation, like backing material out of a plugged auger, the valve gives you smooth control in both directions.

Made to Last

Cross builds these valves to handle the constant cycling and high pressures of farm hydraulic systems. The open center design works perfectly with most tractor hydraulic systems, and the motor spool is designed specifically for the flow characteristics that hydraulic motors need to operate smoothly and efficiently.

Good to Know

This is a direct replacement that bolts right up with standard 3/4-inch inlet and outlet ports and 1/2-inch working ports. The power beyond sleeve lets you add more valves downstream if needed. Since it’s got detent positions, make sure your motor application can handle continuous operation—this isn’t the valve for applications where you want spring-return to neutral.