12mm x 1.75 Metric Hand Tap for Thread Repair and Creation

Description

When you’re staring at a stripped bolt hole in your tractor and need to get back to work, this 12mm x 1.75 metric tap is exactly what you need in your toolbox. Whether you’re dealing with a damaged hydraulic fitting, a worn mounting hole, or need to chase threads that got bunged up over the years, this tap cuts clean, precise threads that’ll hold tight and keep you running.

What You’re Getting

• Sharp cutting edges that slice through steel without binding or chattering
• Standard metric 12mm x 1.75 pitch – one of the most common sizes on modern farm equipment
• High-quality steel construction that stays sharp through multiple uses
• Perfect for repair work or creating new threaded holes when modifications are needed

Built for Real Farm Work

This thread size shows up all over modern tractors and equipment – from hydraulic line fittings to mounting brackets, engine components to loader attachments. You’ll find 12mm x 1.75 threads on everything from compact utility tractors to big row-crop machines, especially on European-designed equipment and many implements that use metric hardware.

Made to Last

Farm shop work is tough on tools, and cheap taps break or dull fast when you’re working with the thick steel used in agricultural equipment. This tap is built to handle the real world – cutting through rust, paint, and tough alloy steel without losing its edge or snapping off in the hole.

Good to Know

Start your hole with a center punch and drill the right size pilot hole first – for 12mm x 1.75 threads, that’s a 10.25mm drill bit. Use cutting oil or even diesel fuel to keep the tap cool and help it cut clean. Back the tap out a half turn every few turns to break the chips and prevent jamming. Keep steady downward pressure but let the tap do the work – forcing it will just break the teeth or snap the tap.