Description

When you’re working on irrigation systems, spray equipment, or any hydraulic setup, sometimes you need to make a tight turn in a small space. This handy 90-degree poly elbow fitting lets you connect threaded ports to hose lines while changing direction—perfect for those spots where a straight connection just won’t work. No more wrestling with kinked hoses or awkward bends that restrict flow.

What You’re Getting

Secure 1/4 inch male NPT threads that screw directly into female-threaded ports
Smooth hose barb end that grips hose firmly while allowing easy installation
Durable poly construction that resists chemicals and won’t rust like metal fittings
Clean 90-degree bend that maintains good flow without creating pressure drops
Compact size that fits in tight spaces where larger fittings won’t work

Built for Real Farm Work

This fitting works great on sprayers, irrigation systems, small hydraulic lines, and anywhere you need to connect hose to a threaded port at a right angle. You’ll find these connections on everything from boom sprayers to wash-down systems to small hydraulic applications around the shop.

Made to Last

The poly construction stands up to fertilizers, herbicides, and other agricultural chemicals without corroding or breaking down. It’s lightweight compared to brass or steel fittings but still tough enough to handle working pressure. The threads are molded in, not cut, so they won’t strip out under normal use.

Installation Notes

Thread the male end into your port hand-tight, then snug it up with a wrench—don’t over-tighten poly fittings. The hose barb works best with reinforced hose and a good clamp. A little dish soap on the barb makes hose installation easier without affecting the seal.