Hydraulic Crimp Fitting Elbow for 1-1/4 Inch Hose to Code 61 Flange Connection

Description

When you’re running hydraulic lines on your tractor or equipment, sometimes you need to make tight turns or connect at angles that straight fittings just can’t handle. This 22.5-degree elbow fitting solves that problem by giving you a smooth directional change while maintaining full flow capacity. It’s designed to crimp onto 1-1/4 inch hydraulic hose and connect to a 1-1/2 inch Code 61 flange, making it perfect for those custom hydraulic setups where space is tight or you need to route around obstacles.

What You’re Getting

• 22.5-degree angle provides gentle flow direction change without restricting hydraulic flow
• Crimp-on design creates a permanent, leak-proof connection to your hydraulic hose
• Code 61 flange connection matches industry-standard hydraulic fittings
• 4S series construction built to handle high-pressure hydraulic systems
• Professional-grade fitting that meets or exceeds original equipment specifications

Built for Real Farm Work

This fitting is designed for tractors and equipment that run hydraulic implements like loaders, backhoes, mowers, and remote cylinders. Whether you’re plumbing hydraulics for a front-end loader, setting up remote hydraulics for a post-hole digger, or connecting hydraulic motors on implements, this elbow lets you route hoses cleanly around tight spaces. The 1-1/4 inch hose size handles good flow for medium to heavy-duty applications while the flange connection gives you a solid mount point.

Made to Last

These fittings are made of materials that resist corrosion, pressure, and wear. The 4S series construction is engineered to handle the pressure spikes and constant vibration that come with hydraulic work on farm equipment. Weatherhead has been making hydraulic fittings for decades, and this fitting shows why they’re trusted by farmers and mechanics worldwide.

Installation Notes

This is a crimp-on fitting that requires proper hydraulic hose crimping equipment for installation. The crimp connection creates a permanent seal that won’t leak or come apart under pressure. Always use proper thread sealant on hydraulic fittings – never just tape that can contaminate your system. Clean both fitting surfaces before connecting, and don’t over-tighten as this can damage the threads or crack the fitting body. Make sure your hose is cut square and clean before crimping for the best seal.