Description
When your top link gets bent, worn out, or damaged, there’s no need to replace the whole assembly. This replacement end lets you fix just what’s broken and get back to work without the expense of buying a complete new top link. Whether you hit something in the field or the threads are stripped from years of adjustments, this left-hand end makes the repair simple and affordable.
What You’re Getting
- 1-inch pin holes that line up perfectly with Category 2 three-point hitches
- 1-1/8 inch left-hand threads for secure attachment to your top link tube
- Heavy-duty construction built to handle the stress of lifting and positioning implements
- Direct replacement that threads on without modifications or special tools
Built for Real Farm Work
This end fits Category 2 three-point hitches found on mid-size tractors from 50 to 100 horsepower. These are the workhorses running everything from finish mowers and cultivators to medium-duty tillers and disc harrows. Category 2 equipment handles the bulk of farming operations where you need more strength than Category 1 but don’t need the heavy-duty Category 3 setup.
Made to Last
Top link ends take a beating every time you lift an implement, work over rough ground, or back up with a load attached. This replacement is built with the same materials and specifications as the original equipment, so it’ll stand up to the forces your three-point hitch puts on it day after day.
Good to Know
Before ordering, double-check that you need the left-hand thread version—most top links have one left-hand and one right-hand end so they adjust properly. The threads should turn counterclockwise to tighten. If your old end is stuck, some penetrating oil and patience usually does the trick. A good pipe wrench gives you the grip you need for removal and installation.
Reviews
There are no reviews yet.